Your channel viewers will see links here, including "subscribe" and "add as friend".
Profile
Name
DIYDaveT
Description
Subscribers
290
Subscriptions
Friends
Channel Comments
|
DIYDaveT
(15 years ago)
At the same time, don't change grits too early or you will have visible scratches in the final product. Take your time. Check your work often by vacuuming up the water (it gets muddy from all the grinding dust). Keep in mind, you are grinding stone. Don't rush it and it will come out fine. It is not as fragile as you think. When you finally run the 3000 grit over it the shine will pop and you will understand everything.
|
|
conrad2001
(14 years ago)
Great stuff. I have actually purchased a hawk dual speed machine wit a water used for $350, I'm going to do my whole house in exposed aggregate concrete. One thing That will help the grinding process is more weight on the top of the motor, This will increase the surface friction, and stabilize the grinding wheel. Thanks again for giving us all the know how.
|
|
DIYDaveT
(15 years ago)
Finally, many congrats to you for taking this on. This is not easy work. It's long, backbreaking labor. And there is a learning curve. And it's not cheap to rent the equip. But when you are done your floors will gleam. Hint (big ass hint): when done with wet hone #1500, do 3000 DRY. I mean bone dry. The shine will freaking pop on you. Then use the Miracle Sealer 511 to seal. Buff it out by putting a clean dry towel under the 3000 grit and then it will really shine w/nice reflection.
|
|
WileyFox08
(4 years ago)
Love this guy. Best Big brother I never had
|
|
IndusCreed74
(14 years ago)
Dave, I had a very good medium shine on 800 on the white marble tiles (1'x1') that our local Home Depot store stocks. The floor got real smooth after 800 and I could not see any scratches whatsoever. With 1500, I did try more water as well as made sure that pads were firmly in place. Did not help :) I have to redo trim work because of the water damage it took but a different topic altogether. I have sealed the floor and loving the shiny smooth floor absolutely. Can't thank you enough!
|
|
SuperWhizy
(5 years ago)
Outstanding! Thanks for sharing.
|
|
IndusCreed74
(14 years ago)
Dave, I finally got around to finishing my marble bathroom floor using the process you showed. The floor looks/feels AMAZINGLY beautiful. Absolutely no lippage. I started out with diamond cups and then used 50, 100, 200, 400 and 800 grit pads. By 200, all the scratches left by cups were gone. I could not even use 1500 and 3000 as the Clarke machine started jumping crazily like mechanical bull on 1500 :) Will post pictures soon. Again, Thank you so much. [Very big ouch for rental expenses]
|
|
OrlandoRestoration
(12 years ago)
Interesting process. As can be expected the skill set of a person may prohibit this. Some people are unable to admit their limitations. Great results in the end.
|
|
conrad2001
(14 years ago)
Hey Dave. I watched this about four months ago. I have since purchased all the Chinese pads as well as a marble restoration floor machine I found on Craigs list. I machine has weights as well as a water tank. The weights are really useful for stabilizing the Machine. It allows the Floor machine to glide much better. Although I have also found that the pads really grab any previous slurry residue. Thanks again for the inspiration
|
|
richmarracino5977
(1 year ago)
Great job Dave!
|
Add comment











