Your channel viewers will see links here, including "subscribe" and "add as friend".
Profile
Name
MrBrainFear
Description
Subscribers
157
Subscriptions
Friends
Channel Comments
|
LegacyMicro
(13 years ago)
Thanks for the info. This is exactly the problem I was having. You're right about the price too. EBAY $125 - $200 average for a used replacement. I think I'm going to just build me a crude replacement p/s.
|
|
high1voltage1rules
(14 years ago)
Hi mate,
|
|
MrBrainFear
(14 years ago)
unfortunately because of the psu pin size its quite tough, but if u disconnect the ATX cable from the motherboard and short the psu like i did to power it up this will give you an indication if the psu can start. Or buy a digital psu tester, coolmax is quite a good one and get an ATX mini (F) to ATX (M) adapter. This will allow you to adapt the power plug and test the 12v, 5v and 3.3v without a multimeter. Or if you have a working ATX PSU then get a ATX (m) to ATX mini (F) adp and try that.
|
|
MrBrainFear
(13 years ago)
I know this is untimely, but i have no idea. most screens are adhered on. using a heat gun on a low setting would usually help getting it off if that's the case. Use caution, those glass shards will hurt if it breaks.
|
|
pattskatoey3139
(5 years ago)
I recently found one of these. Some of the intervals were missing but it worked. I managed to purchase the missing parts but now it will not boot.All I get is the static blue light at the right side of the screen.Power supply is working so I am baffled.
|
|
hitandrepair
(13 years ago)
I wished you would have taken the replacement apart, so I could see what went there. I believe its a surface mount capacitor.
|
|
MessedupBirdie
(10 years ago)
Does anyone here know how the TV tuner works on XPS A2010?
|
|
tutudung84
(10 years ago)
my i tried to turn on , and the light flashing on and off, is it the power problem? it work before since my wife unplug it without turn off, any help out thsnks you
|
|
high1voltage1rules
(14 years ago)
Thanx mate for the sub* ;-)
|
|
manfred-d7w
(2 months ago)
I have a problem with the monitor. When I boot it, it displays for about 9 secs and goes off, that's on bIOS. How do I go about it?
|
|
idjr2654
(12 years ago)
I read online that you an upgrade the CPU on the A2010, have you tried that?
|
|
coolgangster91
(12 years ago)
Hi man how many volts is the PSU.
|
|
leeprofilmz
(12 years ago)
How do you remove a disc stuck in the drive
|
|
high1voltage1rules
(14 years ago)
Mate that would be awsome if you could do that!! If ya want help doing it give me a shout and ill let ya know what parts to get out!! ;-)
|
Add comment



















